Ubiquiti Networks UniFi FlexHD 802.11ac Wave 2 Wi-Fi Access Point أكسيس بوينت

طرح سؤال
UAP-FlexHD
959.20 SR
(السعر غير شامل الضريبة)
(excl, VAT)
1,199.00 SR
ستوفر: 239.80 SR
متوفر بالمخزون
السعر بالنقاط: 95920 نقطة
نقاط مكافأة: 959 نقطة
التوصيل
طرق الدفع
مميزاتنا

ضمان الوكيل .

SMS تنبيهات .

استبدال واسترجاع .

طرق دفع مختلفة .

أفضل الأسعار .

Ubiquiti UniFi FlexHD UAP-FlexHD IEEE 802.11ac 1.73 Gbit/s ...



The Ubiquiti UAP-FlexHD has a small, sleek design and compact form factor that can easily be deployed indoors or outdoors. With flexible mounting options, the Flex HD can be deployed on tabletops, walls, poles, and ceilings.

Ubiquiti UAP-FlexHD Pack Key Features

  • 4x4 MU-MIMO Technology with 1.733 Gbps Throughput
  • Weatherproof for Indoor / Outdoor Installations
  • Flexible Mounting Options for Ceiling, Pole, Tabletop, or Wall
  • 802.11ac Technology
  • High-Density Scenarios
  • 10/100/1000 Ethernet Port

UniFi

Save Money and Save Time UniFi comes bundled with a nondedicated software controller that can be deployed on an on-site PC, Mac, or Linux machine; in a private cloud; or using a public cloud service. You also have the option of deploying the compact UniFi Cloud Key with built-in software.

Powerful Hardware The UniFi AP Flex HD features 802.11ac Wave 2 MU-MIMO technology.

Intuitive UniFi Controller Software Configure and manage your APs with the easy-to-learn user interface.

Expandable Unlimited scalability: build wireless networks as big or small as needed. Start with one (or upgrade to a three-pack) and expand to hundreds while maintaining a single unified management system.

Application Diagram:

Application Diagram

802.11ac Technology Initial 802.11ac Wave 1 SU-MIMO (Single-User, Multiple Input, Multiple Output) technology allows an earlier-generation AP, such as the UniFi AC Pro AP, to communicate with only one client at a time.

802.11ac Wave 2 MU-MIMO (Multi-User, Multiple Input, Multiple Output) technology allows a Wave 2 AP, such as the UniFi AP Flex HD, to communicate with multiple clients at the same time – significantly increasing multi-user throughput and overall user experience. The following describes a 4-client scenario:

MU-MIMO Assuming the same conditions, a Wave 2 AP provides up to 75% improvement overall over a Wave 1 AP. This improvement increases wireless performance and/or serves more clients at the same performance level.

4x4 Spatial Streams At any single time, a Wave 2 AP can communicate with the following MU-MIMO clients: - four 1x1 clients - two 2x2 clients - one 2x2 client and two 1x1 clients - one 3x3 client and one 1x1 client A 4x4 Wave 2 AP delivers up to 33% greater performance than a Wave 1 AP that is 3x3 in both radio bands. MU-MIMO

High-Density Scenarios Both Wave 1 and Wave 2 APs offer 28 independent (non-overlapping) channels: three for the 2.4 GHz band and twenty-five for the 5 GHz band, including DFS channels.

When you use the 2.4 GHz band in a high-density location, you encounter self-interference and channel saturation.

When you use the 5 GHz band, you can deploy smaller cells (coverage areas), so you can support more clients in any cell that deploys more than one AP.

With the advantages of MU-MIMO technology and 4x4 spatial streams, the UniFi AP Flex HD can support more than triple the number of users than a typical Wave 1 AP.

In practice, the maximum number of users the UniFi AP Flex HD can support is limited by radio link airtime. This depends on the amount of traffic each device creates, types of devices, network configuration, and the presence of other APs on the same channel.

Versatile Mounting Options The sleek, compact design lets you locate the UniFi AP Flex HD near users. Versatile Mounting Options

Ideal Mesh Point Solution The UniFi AP Flex HD provides a 4x4 MIMO mesh backhaul for double the speed of traditional mesh solutions.

Ubiquiti UAP-FlexHD Technical Specification

General

  • Dimensions: Ø 48.50 x 159.49 mm (1.90 x 6.28")
  • Weight: 315 g (0.69 lb)
  • Networking Interface: (1) 10/100/1000 Ethernet Port
  • Button: Reset
  • LED: System / Status
  • Power Method: 802.3af
  • Power Supply: 802.3af 48V, 0.32A Gigabit PoE Adapter
  • Max Power Consumption: 10.5W
  • Voltage Range: 44 - 57VDC
  • Operating Frequency: - 2.4 GHz - 5 GHz
  • Max TX Power EIRP: - 2.4 GHz: 23 dBm - 5 GHz: 26 dBm
  • Throughput: - 2.4 GHz: 300 Mbps - 5 GHz: 1733 Mbps
  • Antenna Gain: - 2.4 GHz: 1.6 dBi - 5 GHz: 4 dBi
  • WiFi Standards: 802.11 a/b/g/n/ac/ac-wave2
  • Wireless Security: WEP, WPA-PSK, WPA-Enterprise (WPA/WPA2, TKIP/AES)
  • Mounting: Ceiling/Pole/Tabletop/Wall
  • Operating Temperature: -30 to 70° C (-22 to 158° F)
  • Operating Humidity: 5 to 95% Noncondensing
  • Certifications: CE, FCC, IC
    الشركة المصنعة
    Ubiquiti Networks
    مواصفات المنتج العامة
    منفذ شبكة 10/100/1000
    • (1) 10/100/1000 Ethernet Port
    قوة الانتينا
    • 2.4GHz:1.6 dBi ,
    • 5GHz: 4 dBi
    المعيار اللاسلكي
    • 802.11 a/b/g/n/ac/ac-wave2
    قوة الارسال
    26 dBm
    Encryption
    WEP, WPA-PSK, WPA-Enterprise (WPA/WPA2, TKIP/AES)
    Power Supply
    48V, 0.32A Gigabit PoE Adapter
    Dimension
    • Ø 48.50 x 159.49 mm (1.90 x 6.28")
    استهلاك الطاقة الأقصى
    • 10.5W

    لم يتم العثور على أي تقييمات

    خصومات / الأكثر مبيعاً

    • الأكثر مبيعاً
    • الخصومات
    • شوهد مؤخرا
     
     
     
    التوصيل السريع والآمن

    التوصيل داخل المملكة ودول الخليج

    ضمان الخدمة والجودة

    جميع منتجاتنا أصلية ذات جودة عالية

    الاسترجاع خلال 7 أيام

    لديك 7 أيام لاسترجاع المنتج