About

8-Port Smart Lite PoE Switch

• 8 Gigabit PoE+ capable ports
• 2 Gigabit SFP ports
• 110-watt PoE power budget
• 802.1Q tag-based VLAN
• QoS with 4 priority queues and rate limiting
• Up to 2 Link Aggregation groups

The VigorSwitch P1092 is ideal for SOHO and small business with the high-performance capability. To cater for high bandwidth traffic, it is equipped with 8 Gigabit Ethernet ports for the LAN side, and 2 SFP ports for the backbone side. VigorSwitch P1092 is equipped with extensive facilities for maximizing your LAN performance, VLAN capability to allow flexible network design, and QoS capability for flexible bandwidth control.

LAN Management

VigorSwitch P1092 offers features that help to build a secure business network, such as VLAN, Storm Control. While allowing visitors to connect to the network for Internet access, these features help to block the visitors’ access to business network resources and protect the network from being exhausted by malicious traffic.

8 PoE+ Capable Ports

All the 8 Ethernet ports of VigorSwitch P1092 are compatible with 802.3at and 802.3af standard, and provide up to 30W per port to network devices such as wireless access points, IP phones, and IP surveillance. This reduces the need for power cables and adapters, which lowers the cost of installation, as well as offers the flexibility to install those devices, not being limited by where the power outlets are.

The VigorSwitch P1092 helps you build a green networking by offering power-saving features, such as IEEE 802.3az (Energy-Efficient Ethernet), which allows the switch to dynamically adjust the power on each port according to the client activity and cable length, this can be a ideal power saving solution for your company.

QoS ensures important traffic has high priority

Speed up the network by Link Aggregation

If cascading more switches are required, link aggregation will provide the network higher throughput and link redundancy. VigorSwitch P1092 supports link aggregation by LACP (Link Aggregation Control Protocol), up to 2 Link Aggregation Group can be set up on VigorSwitch P1092, and each of the group can have up to 2 port members.

• Specification

System
Standard
 

• 802.3 10Base-T
• 802.3u 100Base-T
• 802.3ab 1000Base-T
• 802.3x Flow Control 
• 802.3 Auto-Negotiation
• 802.1p Class of Service
• 802.3ad LACP
• 802.3az EEE

 IP version
 

• IPv4

 Performance
 

• 1.5 Mbit buffer size
• 20 Gbps switching capacity
• 14.9 Mpps forwarding rate (64 bytes)
• 4k MAC address table
• Up to 9KB jumbo frame

Hardware
Ports
 

• 8 x 10/100/1000 Gigabit Ethernet RJ-45 PoE+ capable ports
• 2 x SFP ports

 Dimension (mm)
 

• 265(L) x 184(W) x 44(H) (10.4" x 7.2" x 1.7")

 Weight
 

• 1.68 kg (3.7 lb)

 Temperature
 

• Operating: 0°C ~ 40°C
• Storage: -20°C ~ 70°C

 Humidity
 

• Operating: 10% ~ 90% (non-condensing)
• Storage: 5% ~ 90% (non-condensing)

Power over Ethernet (PoE)
Standard
 

• 802.3af (PoE)
• 802.3at (PoE+)

 Power Budget
 

• 110 watts

VLAN
 
 

• Up to 10 VLAN
• 802.1q Tag-based VLAN

QoS
QoS Queues
 

• 4 queues
• Queue Scheduling: SPQ, WFQ

 Rate Limit
 

• Ingress Rate Control
• Egress Rate Control

 Class of Service
 

• 802.1p CoS

Security
 
 

• Storm Control

Availability
Link Aggregation
 

• 802.3ad Support
• Up to 2 ports per group
• Up to 2 groups

 Multicast
 

• IGMP v1, v2

Management
Configuration & Monitoring
 

• Web Interface: HTTP
• Configuration File Export & Import

 Diagnostic Tool
 

• Port Mirroring